GLP impression X5, User Manual

Page: 34 / 80

www.glp.de
34
impresssion X5 User Manual
Load User Settings
User Settings 1 >>> Confirm<<<
Apply a user preset to
fixture settings
User Settings 2 >>> Confirm<<<
User Settings 3
>>> Confirm<<<
Setting Defaults >>> Confirm<<<
Return fixture to default
settings (not including
DMX address, protocol
type, Ethernet / CRMX
configuration, user offsets,
user presets and counters)
Information
Live diagnostic
Shows overview of fixture
information
Show errors Shows any stored errors
Show temperature Shows fixture temperature
Show fan status
Shows current cooling fan
status
Show controllers info Shows controllers info
Show iQ.Mesh status
Shows current GLP
iQ.Mesh status
Show LED calibration
Shows LED calibration
information
Show fixture counters
Shows total device hours
(non-resettable),
resettable device hours,
total power cycles (non-
resettable), resettable
power cycles, resettable
air filter hours
Show DMX input
Shows DMX values being
received
Show DMX info
Shows info about any lost
DMX packages
Show LED calibration Shows any stored errors
Manual Control
Reset All Reset all effects
Reset Pan & Tilt Reset pan and tilt
Reset Head
Reset all effects except
pan and tilt
Manual DMX
Warning!
Fixture will
start moving!
Press Enter
Pan < 001.. 128 ..255 >
Manually control all
effects
Tilt < 001.. 128 ..255 >
… scroll through effects
Load No-Signal Scene Confirm (press Enter)
Display the scene that is
stored as Captured Scene
Save as No-Signal Scene Confirm (press Enter)
Capture current scene
and store it as captured
scene for use in
No Signal
menu
Capture DMX Values
Confirm for 3 seconds
(press Enter)
Sets all manual DMX
values to the values
currently being received
via DMX
Reset Manual Values
Confirm for 3 seconds
(press Enter)
Reset all manually entered
DMX values to zero