R
R
R
-
-
-
G
G
G
-
-
-
B
B
B
GLP
German Light Products GmbH
(Instruction version 1.5) / from software version 1.24/30)
19
5.1 Safety regulations
•
Disconnect the fixture from the mains power before commencing any
maintenance work!
•
Wait minimum 15 minutes after removing the power to allow the fixture to
cool down.
5.2 Maintenance Intervals (rule-of-thumb)
The maintenance schedule of any given fixture depends on the installation
environment. Hence no specific guidelines can be given. The cleaning intervals
given below are suggestions, based on practical experience. We suggest that
you start with these and develop your own maintenance schedule as you see
the fixtures performance in your specific environment.
Maintenance Task
Interval
How
Cleaning of LED lenses and
optical system
weekly
soft brush /lint-free cloth
Cleaning of fans and air channels
monthly
vacuum cleaner, airbrush, etc.
Attention:
•
Never let optical parts come into contact with oil or fat.
•
Before running the fixture wait until all parts are touch dry.
•
Never touch lenses with bare fingers.
