3
Digital Clock / Timer
221062A
Diagram 3
100 ILLUSTRATED
Diagram 2
3910
100 ILLUSTRATED
CLOCK/TIMER
MOUNTING
BRACKET
FASCIA
SECURING
SCREWS
3887
CONTROL
HOUSING
COVER
SECURING
SCREWS (2)
3909
CONTROL
HOUSING
COVER
SECURING
SCREW
Diagram 1
100 ILLUSTRATED
FASCIA
SECURING
SCREWS (2)
CONTROL
HOUSING
COVER
Diagram 4
CONTROL
HOUSING
SECURING
SCREW
*
4 WAY
TERMINAL
BLOCK
*Remove yellow link
Y2
Y1
N
L
B BR
Y Y
BR
B
Y
Y
5346
continuation of “Boiler Fixing”
Remove two of the fascia securing screws,
see diagram 1.
Remove the control housing securing screw and cover,
see diagram 1.
Fit the clock/timer bracket and loosely secure with the
two previously removed fascia securing screws, see
diagram 2.
Remove the control housing securing screws,
see diagram 3.
Secure the control housing to the frame with one of these
screws, see diagram 4.
Remove the four way terminal block from the top left
hand side of the control box, see diagram 4.
Fit the clock/timer to the bracket, see diagram 5.
Route wiring harness through the keyhole slot in the side
of the control box, insert the “snap in” cable bush and
connect to the clock/timer and four way terminal block
connector, see diagram 6.
Remove the clock/timer blanking plate from the outer
case and use the new blanking plugs supplied.
Stick the casing label, from the loose items pack, to the
right hand side of the clock/timer.
Note. Some adjustment of the clock/timer bracket may
be required to allow for a satisfactory alignment of the
outer casing.
Now continue with “Boiler Fixing”, as described in the
Installation Instructions.