27
Use only the supplied charger with
corresponding original Li-Ion bat-
tery (only item no. 000301.0000).
Operate charger only in dry rooms.
NOTE!
The battery
(C)
is only partially charged.
Before initial use, fully charge battery.
Please ensure that the charging proce-
dure is performed at room tempera-
ture. This is the only way to ensure a
long battery life.
A significantly decreased runtime in
spite of charging indicates that the bat-
tery is dead and must be replaced.
Use only original Li-Ion batteries, which
you can purchase from manufacturer’s
customer service.
Charger and battery can heat up during
charging. This is normal and not a sign
of a technical defect.
The Lithium-Ion battery can be charged
at any time, regardless of charge state.
Premature interruption of charging
does not cause damage to the battery.
A protective circuit on the battery pre-
vents depth discharge of battery.
The battery is equipped with tempera-
ture monitoring that only permits charg-
ing over a temperature range between
0 °C and 45 °C. This ensures a long bat-
tery life.
Do not press the On/Off switch again if
the device has switched itself off auto-
matically. The battery can be damaged.
Note the details concerning disposal of
the battery.
6.1 Charging procedure
Figures 3 - 4
Remove battery
(C)
from pack-
aging (only item no.
000301.0000).
The charging process starts as soon as
the plug has been plugged into the
power outlet and the battery
(C)
has
been placed in the charger
(G)
.
Due to the intelligent charging method,
the charging condi- tion of the battery is
automatically detected and the battery is
charged with the optimum charging cur-
rent, depending on battery temperature
and voltage. This gives longer life to the
battery and always leaves it fully charged
when kept in the charger for storage.
NOTE!
The battery can also be charged while it
is in the protective covering.
Indicator statuses:
The charging process is indicated
by the flashing of the battery charge indi-
cator.
A solid light on the battery charge
indicator signals that the battery is fully
charged or that the temperature of the
battery is not within the permitted charg-
ing temperature range, and can therefore
not be charged. The battery is charged as
soon as the allowable charging tempera-
ture range is reached. When the battery is
not inserted, a solid light on the battery
charge indicator signals that the mains
plug is inserted in the plug socket and
that the charger is ready for operation.
Following a successful charging proce-
dure, first remove the battery from the
charger. Then disconnect the charger
plug from the power outlet.
7 Commissioning
Figures 5 - 17
WARNING
BEFORE COMMISIONING OBSERVE
CHAPTER 2 “FOR YOUR SAFETY”.
7.1 Inserting the battery and
attaching the add-on parts
ATTENTION
The battery that is supplied is not water-
proof! Use the protective covering (D) to
prevent damage to the battery.
Pull the protective covering
(D)
over the
battery.
When doing this, ensure that
the protective covering is not dam-
aged and fits correctly.
3
4
5
GB
MULTIJET.qxp_Text_GB 06.01.20 15:50 Seite 27
