3 Before using the device
This chapter contains information about
the delivery status.
3.1 Delivery status
The device is shipped as standard as
follows:
!
Cut & Brush (completely installed)
!
1 x user manual and product
inform a tion
!
1 x allen key
3.2 Elements of the device
A
Adjustable safety guard
B
Lock button
C
Brush
D
Disk
E
Guiding wheel (constituent part of
the MultiBrush device)
F
Locking device (2 x left/right) (con-
stituent part of the MultiBrush devi-
ce)
G
Motor/gear device
(constituent part of the MultiBrush
device)
4 Technical Data
Cut & Brush
max. rotational speed: 1800 min
-1
Dimensions
ø disk: 150 mm
ø brush: 100 mm
Brush width: 50 mm
Device weight: approx. 0,6 kg
5 Installing the "Cut & Brush
unit"
Figures 1 - 5
CAUTION! RISK OF BURNS
CAUSED BY HOT PARTS!
During assembly or conversion work
the drive parts of the device or com-
ponents can still be very hot and
may cause burns.
It is therefore important to observe
the following safety instructions:
!
Wear protective gloves during
assembly!
WARNING! RISK OF DEATH
DUE TO ELECTRIC SHOCK!
!
Switch off the MultiBrush device and
remove the device plug from the
mains power socket.
Your MultiBrush device is installed as
shown, for example. Open the inter-
lock
(K)
of the guide arm
(M)
as
shown in the illustration.
With the lock applied
(K)
remove the
guide arm
(M)
and then the surface
brush
(N)
.
Now open the locking device
(K)
of the drive arm
(P)
, as shown in the
illustration and remove, with the lock
applied,
(K)
the drive arm
(P)
with
safety guard
(O)
.
1
2
3
17
G
B
E
F
G
F
A
B
D
C
RZ_CUTBRUSH_DE_GB_FR_NL_978480-02_Text_GB 09.10.17 16:35 Seite 17
