Glomex PANDORA V8001, User And Installation Manual

Page: 68 / 172

URANIA 2 V9331 - PANDORA V8001 - RHEA V8100
66
ENGLISH
www.glomex.it
For further information, please address to the
GLOMEX Service Centre (see section “Technical
Support”).
11. RESHIPPING
Should you need to return the antenna to
GLOMEX, place it in a box, possibly the original
one, making sure it is well packaged and that the
upper and lower side are well recognizable.
In order to prevent any damage to the antenna dur-
ing transport, it is necessary to fasten it to the lower
radome by means of four M8 nuts screwed on the 4
screws coming out of the lower radome.
Together with the antenna, please also send the
control unit, so that a verification of the whole sys-
tem is possible.
NOTE: GLOMEX will not be liable for possible
damage occurred during transport due to incorrect
packaging.
S
WARNING
Do not ship the antenna to GLOMEX for repairs
without having received a corresponding authoriza-
tion to return the material (RMA), as reported in the
general warranty/support conditions.
10. The decoder blocks - alternating current fluctuations - refer to the user manual of the
receiver for support
11. The equipment operates with
still boat but not with moving
boat
- the satellite signal is
obstructed
- move away from possible
obstacles obstructing the sat-
ellite signal
- failure in the gyroscope sys-
tem
- contact the Service Centre