VENUS SATURN MARS RHINE
65
E
NGL
ISH
www.glomex.it
To connect the coaxial cables to VL, HL, VH and
HH sockets of the coaxial rotating joint it is neces-
sary to remove the upper radome and to connect
the various cables to the connectors (1) available
inside the lower radome, trying to give the cables a
path that follows the curvature of the radome.
NOTE:
for some models, there is a single bracket
with 4 connections instead of 2 brackets with 2
connections each.
7. The control unit may be fastened to a vertical
wall by means of the Vimar
®
in-built covering
frame provided together with the antenna. In
this case, drill a hole with a reciprocating saw,
using the cutting template in Fig. 23.
The control unit may be fastened also to a hori-
zontal surface or to the roof. In this case, it is
necessary to use the 2 L-shaped brackets pro-
vided together with the antenna and fasten
them as indicated in Fig. 22.
8. Connect the cables to the line amplifier (is avail-
able), to the multiswitch (if available), to the
receiver(s) (not included), as indicated in Fig. 1,
Fig. 16, Fig. 19.
Fig. 21
Fig. 22
Summary of Contents for MARS V9801
Page 2: ...VENUS SATURN MARS RHINE 44 www glomex it ENGLISH...
Page 4: ...VENUS SATURN MARS RHINE 46 www glomex it ENGLISH...
Page 24: ...VENUS SATURN MARS RHINE 66 ENGLISH www glomex it 6 1 LOWER RADOME CUTTING TEMPLATE Fig 23...
Page 34: ...VENUS SATURN MARS RHINE 76 ENGLISH www glomex it Fig 33...
