SATURN MARS RHINE
54
www.glomex.it
EN
GLI
S
H
8. Position the antenna onto the seal, inserting the
4 threaded bars through the holes, and pay
attention to direct the orientation symbol of the
antenna towards the bow.
9. Install the fastening reinforcements onto the
threaded bars and screw in the M8 self-locking
nuts.
10. Completely tighten.
S
WARNING
GLOMEX declines any liability for an incorrect
mounting of the radome on the boat.
11. Have the four 10 m cables pass through the previ-
ously drilled hole (V9104S2U, V9104SKEWS2U,
V9804S2U, V9804SKEWS2U, R9804S2U,
R9804SERS2U).
12. Should it be necessary to shorten the cable,
please refer to the instructions given in Fig. 13.
13. Make sure that the cable core is correctly
inserted in the central hole of the female con-
nector on the antenna.
Manually screw in the ring nut of connector F.
Once the ring nut has been manually screwed
in, tighten by ¼ turn by means of a 11 mm
wrench.
14. Remove the two safety straps found on the azi-
muth and lifting gears.
Fig. 11
Fig. 12
GL00095
Fig. 13
