GLOCKENKLANG Blue Soul User Manual Download Page 2

Page: 2 / 6

Thank you for choosing the
GLOCKENKLANG Blue Soul amplifier. You
have purchased an exquisite piece of
equipment, which was designed after the
most modern technical aspects.

Attention!

To activate your additional 3 years
warranty, you should send in the enclosed
warranty card.
Please enter the serial number of your
amplifier and the date of purchase and
send it to:

Glockenklang
Eimterstrasse 147
D-32049 Herford
Germany

or email to: [email protected]

This serves as a measure to ensure
excellent customer service in the
future.

For your safety

Please read the following instructions
carefully. These tips will ensure long and
trouble free operation of your new
GLOCKENKLANG product.

Operational restrictions

Do not operate the amplifier under the
following conditions:

•   In direct sunlight
•   In extremely dirty or dusty places
•   In extremely humid or wet places
•  Around heat emitting appliances

Caution: When rack mounting the

Caution: When rack mounting the
amplifier, make sure to leave adequate

amplifier, make sure to leave adequate

amplifier, make sure to leave adequate
room for ventilation. The unit needs this

room for ventilation. The unit needs this

room for ventilation. The unit needs this
ventilation space

ventilation space

ventilation space to adequately exhaust

to adequately exhaust

it´s internally generated heat.

Handling

Do not drop the amp. Do not use
excessive force when activating switches
and dials.

WARNING!

WARNING!
DO NOT OPEN!

DO NOT OPEN!

DO NOT OPEN!
NO USER SERVICEABLE PARTS INSIDE.

NO USER SERVICEABLE PARTS INSIDE.

NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED

REFER SERVICING TO QUALIFIED

REFER SERVICING TO QUALIFIED
PERSONNEL.

PERSONNEL.

Care

Use a soft, clean and dry cloth only to
clean the amplifier. Do not use aggressive
chemicals to clean the housing. Do not
use compressed air to clean the housing.
You may carefully vacuum the air intake
and exhaust areas from time to time to
remove loose dust accumulation.

Please, keep this User Manual for

Please, keep this User Manual for
future references

future references

General instructions

Your Blue Soul head´s special features:
        "Effect Loop" is a parallel loop with
blending control from 0% till 100% on the
front panel and gain control ±5 dB of
Effect Return. Additional, you can use the
Effect Return either as a mixable Line In or
as a stereo MP3 players input.
It is switched post eq / pre volume-control/
pre-DI out.
       The power amp is short circuit, high
temperature and DC voltage protected.
In case of high temperature or DC
current, the red "Protect" LED will come on.

Caution

Caution!!!!

Due to safe ventilation, do not remove

Due to safe ventilation, do not remove
the bumpers on the bottom of the amp!

the bumpers on the bottom of the amp!

Please ensure adequate ventilation when
rack mounting the amplifier.
Leave a minimum of 5 mm space below
the amplifier. Make sure that the air
entry/discharge vents at the right side of
the housing and the bottom are
unobstructed.

WARNING!

WARNING!
TO REDUCE THE RISC OF FIRE OR

TO REDUCE THE RISC OF FIRE OR

TO REDUCE THE RISC OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE

ELECTRIC SHOCK, DO NOT EXPOSE

ELECTRIC SHOCK, DO NOT EXPOSE
THIS

THIS

THIS EQUIPMENT TO RAIN OR MOISTURE.

EQUIPMENT TO RAIN OR MOISTURE.