4.1 Effect/MP3 On Switch
Activates the
Effect Loop
( Parallel Loop ). This
feature can also be activated by foot switch.
4.2 Effect/MP3 Gain Control
Varies gain of the Effect Return/MP3 In
between ±5 dB.
4.3 Effect/MP3 Control
Mixes the effects loop into the original signal
from 0% ( original signal only) to 100% (effect
only)
5.1 Volume Control
Serves as main volume control for the power
amp and the Phones Out jack on the rear.
Due to the logarithmic curve of the pot, you
have to turn it up about 3 to 4 o´clock for full
output-power!
6.1 Power Switch with LED (blue)
A/C Switch to turn on power to the unit. Power
On is indicated by a blue LED.
6.2 Protect LED (red)
Illuminates when one of the protection circuits
activates. The speakers will be disconnected
with this light on.
6.3 Peak LED (yellow)
Illuminates when the power stage of the
amplifier begins to clip (overdrive). It warns of
overdrive and distortion.
