10
Rev.12.18 of 12.12.18
3-
Indicates the percentage of power emitted by the device
4-
Indicates the Khz frequency used by the program
5-
Indicates the duration of the program expressed in minutes
6-
The plug symbol indicates that the device is connected to the mains
correctly, while the battery symbol indicates that the device is being
powered by the battery.
Luminous signals
On/off indicator
PAUSE indicator (during the treatment)
General error indicator. If the led turns on, check the connections between
the cables and the electrodes. If the led is still on, contact the service
centers.
Power level indicator
Acoustic signals
During the use, the device emits a sound similar to "do-re-mi", which indicates a
correct emission.
A long beep indicates the end of the treatment.
Sound alarms can be disabled from the setting menu.
ALARMS
Correct power emission: The treatment is going on properly.
Laser emission.
Cable not connected Ensure that the cable is connected to
the correct output.
Device in pause.
Press OK to continue the treatment.
The device is in stand-by mode: Press the button on the
handpiece to start the emission.
Summary of Contents for RF CLINIC PRO
Page 1: ......
Page 2: ...2 Rev 12 18 of 12 12 18...
Page 19: ...19 Rev 12 18 of 12 12 18...
Page 20: ...20 Rev 12 18 of 12 12 18...
