ECO Spot C25E/40E/60E User Manual
Copyright © 2017 Globus New Media LLC
Page 3
Multi-functional Yoke
The yoke can…
Gobo Types and Size
(see
Specifications
for Gobo Dimensions)
The projector takes
metal
and
glass
gobos and filters with a max thickness of 5mm.
Because of its light intensity and resulting heat,
film gobos cannot be used.
The gobo size is E-Size, some units have adapter rings that can be removed and allow the
use of larger D-Size gobos.
The recommended gobo image diameter for best image quality is 25mm and below. An
image diameter of up to 32mm is possible with some yellowing and focusing weakness in
the outer projection area.
Gobo Placement
(see
Specifications
for Gobo Dimensions)
Unscrew the thumbscrews to remove the front cover with the projection lens.
•
slide over the length of the fixture body to accommodate a wide range of pointing
directions.
•
be screwed to a wall or ceiling or fastened with a C-clamp
•
also serve as stand.
•
Push the two pins of the gobo retaining ring together and pull out the retaining
ring. Carefully remove the old gobo and replace it with the new gobo.
•
Tip:
Tilt the projector forward while placing the palm of your hand inside, the old
gobo will fall into your hand.
•
If you have a glass gobo, place the more reflective side towards the light bulb.
•
Replace the retaining ring and make sure it evenly pushes the gobo all the way
back.
•
Replace the front cover and adjust the focus by threading the projection lens in or
out.
