ECO Spot 70 User Manual
Page 2
Copyright © 2010 Globus New Media LLC
Page 2
Handling Instructions
Warranty
One Year from Date of Purchase
Contact
Globus New Media LLC
Tel 1-888-987-1112 or 1-408-416-4444
Fax 1-408-416-4445
Focusing
Power up the projector by pressing the larger switch in
the back.
Turn on the gobo rotator with the smaller switch in the
back and switch it off when the gobo projects in the
desired position.
Focus the projection by twisting the lens in and out
until the image is well focused. When used for the first
time, the lens will often need to be twisted outwards
many rotations to reach the focusing point.
Lens Options
Before the initial start-up, please unpack and carefully check for damage caused
during transportation.
Place your fixture at a suitable place with good air flow.
Make sure there are no flammable materials close to the lamp.
After turning off the lamp, it will take 5-10 minutes to restart.
Depending on the ambient temperature, the lamp may need up to 60 sec. to start.
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Standard 25 degree (included)
Narrow 15 degree
Medium 18 degree
