4 | GloboFleet
®
Downloadkey II user manual | © 2014 Buyond GmbH
Read out tachograph data
and driver card
1. Place the driver card in the left and the company
card in the right slot of the tachograph and wait until
the registration is complete with both cards.
2. Plug the downloadkey in the appropriate port of the
tachograph (see page 6-08). The „INIT LED“ will flash
briefly to confirm functionality.
3. During the download the „READ LED“ will flash
continuously. Wait till the „OK LED“ stays solid. The
download is complete when the „OK LED“ is solid.
Now you may remove the downloadkey and company
card.
Attention:
To read the driver card this feature must be enabled via the
configuration software. (See p.10)
