Globestock G.Winch, Service Manual

Page: 8 / 15

8
9. REFIT CLUTCH ASSEMBLY
9.1
Ensure the base plate is correctly seated.
9.2
Clean down both brake linings with a dry cloth and apply a very
small amount of lithium-based grease to both surfaces (Ensure not
to apply too much grease as this will cause the brake to slip when
under load)
9.3
Place the first lining onto the base plate.
9.4
Place the gear ring onto the lining, ensuring the correctly
orientation as shown.
9.5
Fit the brass ring into the centre of the gear ring.
9.6
Place the second lining onto the gear ring.
9.7
Apply a small amount of lithium-based grease to the thread of the
clutch body and screw down onto the brake lining. (Ensure all
components are lined up and the clutch body does not pinch any of
the brake linings)