Page 8
Safeguards & Safety Instructions
TO AVOID SERIOUS PERSONAL INJURY:
•
DO NOT
operate roller grill before reading the instruction manual.
•
ALWAYS
disconnect or unplug electrical power before cleaning, servicing or adjusting any parts or
attachments.
•
NEVER
bypass, alter, modify or attach unauthorized parts to this equipment.
Doing so can create hazards and will void warranty.
•
NEVER
operate roller grill with a damaged power cord or plug.
•
NEVER
leave roller grill on overnight or for prolonged periods of non-use.
•
NEVER
use roller grill as a heating source for your kitchen, space, or room.
•
ALWAYS
keep hands, hair and clothing away from moving parts and heating elements.
IMPORTANT SAFEGUARDS & SAFETY INSTRUCTIONS
When using electrical food equipment, basic safety precautions must always be followed,
including the following:
• Do not touch hot surfaces. Use handles or knobs.
• To protect against risk of electrical shock, do not put roller grill in water or other liquid; do not
put the roller grill into a dishmachine for cleaning.
• Never directly touch the heated, moving rollers while the grill is on.
• Unplug from power outlet when not in use, before putting on or taking off parts, and before cleaning.
• Do not operate equipment with a damaged cord or plug; after the appliance malfunctions or is
dropped or damaged. Call for service.
• The use of attachments not recommended or sold by the manufacturer can cause fire, electrical shock
or injury.
• Do not use outdoors.
• Do not let power cord or extension cord hang over edge of table or counter or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not use this equipment for anything other than the use intended by the manufacturer.
• Do not yank on cord to disconnect.
• Never plug equipment in where water floods the area.
• Place the appliance on a firm, stable surface.
• The Globe roller grill does not contain
any
user-serviceable parts. Globe dealers or recommended
qualified technicians must carry out repairs. Do not remove components or service panels on this product.
• Globe takes every care to make sure that all products are safe. Steel cutting procedures used to manufacture
these items result in sharp edges. These sharp edges are removed to the best of our ability; however, we
insist the operator take care when in contact with this piece of equipment.
• During operation roller grill reaches high temperatures, in turn, heating stainless steel surfaces.
Take extreme care when operating.
• Turn power off, and remove plug from the wall for cleaning.
• Allow roller grill to cool down after use and before dismantling for cleaning. Roller grill will be too hot to
handle immediately after use.
• The Globe roller grill is equipped for the voltage indicated on the nameplate mounted on the rear of
the unit. Roller grill is designed for use on alternating current (AC) only.