Page 7
THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THE OUTLET TO WHICH
THIS PLUG IS CONNECTED MUST BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE
PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT UNDER ANY CIRCUMSTANCES
CUT OR REMOVE THE THIRD GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER
PLUG (Figure 7-1 and Figure 7-2).
7. Inspect the chopper to ensure all parts have been provided.
8. Make sure the warning label is properly positioned and legible and the instruction manual is available near
the chopper.
9. Complete the warranty card and mail it to the factory.
10. Clean and sanitize the chopper using the procedures outlined in the cleaning section on page 10 prior to
using the chopper.
11. Contact your local representative or the factory directly if you have any questions or problems with the
installation or operation of this chopper.
INSTALLATION AND PROPER GROUNDING
Figure 7-1 Correct
Figure 7-2 Incorrect
