Customer Service, Sales and Technical Support:
Phone: 1 (800) 394-4562 • 1 (201) 599-1400
Fax:
1 (201) 599-1406 • E-mail: [email protected]
© 2022 Globe Scientific Inc. All rights reserved. The Globe Scientific logo is a registered trademark of Globe Scientific Inc. 3385 Guide 22214
®
Diamond
®
SeroFlow
™
Pipette Controller
Quick Start Guide
OPERATING INSTRUCTIONS
IMPORTANT:
The pipette controller cannot be operated
without the internal filter in place. During operation, please do
not overfill the serological pipette beyond its maximum level
as this may contaminate the pipette controller and the internal
filter. If overfilling occurs, change the internal filter immediately
and clean any potentially contaminated components, including
the silicone adaptor. Only use filters provided by Globe
Scientific.
Charging the Unit
• Use only the power adaptor supplied with the unit. Using a
different adaptor may cause damage to the unit or even create
a fire or explosion hazard.
• The pipette controller can be charged by plugging the power
adaptor directly into the unit, or by using the charging stand in
conjunction with the power adaptor
• The unit may be used while charging.
Speed Adjustment
• Overall aspiration and dispensing speed can be controlled by
adjusting the speed adjustment dial. Rotate the dial towards
the minus icon to slow the rate, and rotate the dial towards the
plus icon to increase the rate.
• Fine speed control can be achieved by using varying pressure
on the operating triggers.
Fit the Pipette
• Gently insert a serological pipette into the silicone adaptor
located in the nose cone. Do not use excessive force as this may
damage the silicone insert.
Aspiration / Dispensing
• Aspirate or dispense using the appropriate triggers. The desired
rate can be controlled using both the speed adjustment dial and
varying pressure on the triggers (see:
Speed Adjustment
). In
addition to using the dispense trigger, fine control dispensing
can be performed by using the effect of gravity.
PRECAUTIONS
• Never use the pipette controller with highly flammable liquids.
• Carefully read and understand these instructions prior to use.
• Ensure a good working environment free of explosive or
hazardous and inflammable substances.
• Do not use excessive force when using.
• If the pipette controller does not operate normally, immediately
stop operation.
• Only use spare parts provided by Globe Scientific.
• Preferable operation and storage temperature range is +10°C
to +30°C.
Service:
In the unlikely event service is required, please contact
Globe Scientific.
