GlobalSCAPE DMZ Gateway v3.1, User Manual

Page: 19 / 60

Installing DMZ Gateway
19
o
If you start the service, you can execute the DMZ Gateway Administration interface script
(e.g., type:
/opt/dmzgateway/bin/DMZGatewayAdmin
).
Refer to the example below for details of the installation process.
Solaris x86 32-Bit or 64-Bit
To install DMZ Gateway
1. Transfer the DMZ Gateway installer archive to a convenient directory on the target machine.
2. On the target machine, open a terminal window. The installation package must be run with root
privileges. If not already logged on as the root user, change to root using the
su
command in the
terminal window:
su
3. Change to the directory containing the installer archive and perform the following:
gunzip dmz-gateway-solaris-x86-32.tgz
tar xvf dmz-gateway-solaris-x86-32.tar
./Install.sh
4. Follow the prompts to complete the installation.
o
You will be prompted to accept the license agreement, and to specify the installation and
configuration directories (e.g.,
/opt/dmzgateway ), etc.
o
After everything is installed, you will prompted to register and start the DMZ Gateway
daemon service.
o
If you start the service, you can execute the DMZ Gateway Administration interface script
(e.g., type:
/opt/dmzgateway/bin/DMZGatewayAdmin
).
Refer to the example below for details of the installation process.
Example of Installation Process
Below is an example of executing the Install.sh script on a Solaris x86 32-bit computer.
== License Agreement ==
OMITTED
– End-user License Agreement
Do you agree to the above license terms? [yes or no]: yes [ENTER]
== Choose Install Location ==
Please specify the path into which the DMZ Gateway program files will be installed or press "Enter" to
accept the default.
Specify installation directory [/opt/dmzgateway]: [ENTER]
== Choose Configuration Location ==
Please specify the path in which to store the DMZ Gateway Server configuration settings or press "Enter"
to accept the default.
Specify configuration directory [/opt/dmzgateway]: /export/home/appdata [ENTER]
== Choose Installation Owner ==
Please specify the user account name to use as the owner of the installed files.
Specify owner [root]: [ENTER]
== Choose Installation Group ==
Please specify the user group name to use as the group of the installed files.