GlobalSCAPE DMZ Gateway v3.1, User Manual

Page: 13 / 60

13
Installing DMZ Gateway
The topics in this section provide instructions for installing DMZ Gateway.

System Requirements for DMZ Gateway

Installing DMZ Gateway on Windows Systems

Installing DMZ Gateway on non-Windows Systems

Activating DMZ Gateway

Manually Registering and Deregistering the DMZ Gateway Server Daemon

Upgrading or Repairing DMZ Gateway

Uninstalling DMZ Gateway
System Requirements for DMZ Gateway v3
The GlobalSCAPE Quality Assurance team tests our products with a variety of operating systems,
software, and hardware. It is possible for DMZ Gateway to function with other operating systems,
software, and hardware, but is only tested and approved for use with the following:

Accepts incoming connections from EFT Server Enterprise v6.2 and later, and EFT Server 6.2
and later. (Versions prior to v6.2 require DMZ Gateway v2)

Accepts incoming connections from Mail Express Server v3 and later

Supported operating systems:
o
Windows Server 2003 32-bit and 64-bit
o
Windows Server 2008 R1&R2 32-bit and 64-bit
o
Red Hat Enterprise Linux release 5.4 32-bit and 64-bit
o
SuSE Linux Enterprise Server release 11 32-bit and 64-bit
o
Ubuntu 8.04LTS Server Edition 32-bit and 64-bit
o
Solaris 10 10/09 32-bit and 64-bit

x86-compatible processor (Itanium 64-bit processors are not supported)

1GB memory

1024x768 resolution or higher display (headless computer supported on non-Windows systems)

Remote administration must be available.

On Solaris and Linux-based systems, the administration interface will operate locally; therefore,
you must:
o
Export the display to a remote X-Server to access the user interface.
o
Make available on the DMZ Gateway computer the subset of X11 libraries necessary for
exporting the display.
o
Properly configure a remote X11 server. The DMZ Gateway Server may be manually
configured without the use of the administration interface.