GlobalScale MOCHABIN-V1, Quick Start Manual

Page: 10 / 39

MOCHABIN-V1 Quick Start Guide
page: 10 / 39
10
/
39
Note 1:
1) J12 and J13 are the same eth2 port with different form factor, either RJ45 or SFP
2) J10 is a 10Gb SFP+ eth0 port
3) Eth0 and eth2 are network bonded in mode-1(active backup) as the same WAN port with eth2 set to bond-primary. This
means eth0 will be active only when eth2 doesn’t exist or fails.
No Part location Name Description
14 U1 SoC-Marvell 88F7040 @1400NHz
15 J4 M.2-2080-B key socket Reserved for SSD expansion
16 J2 JTAG Debugger 5x2 pins, *see section E-1
17 J5 Mini-PCIe socket Reserved for WiFi ax 2x2 + BT5 module
18 WiFi-J1/J2/J3 W.FL antenna connector *see section E-4
19 WiFi-J4/J5/J6 WiFi configuration *see section E-4
20 J38 SIM sleeve Connects to J4, J5 and J39 *see section E-7
21 LED2 WiFi LED for J5 Not populated *see section E-5
22 J40 Header for external WiFi LED Pin1-anode, pin2-cathode
23 LED1 SSD LED for J4 Not populated *see section E-6
24 J34 Header for external SSD LED Pin1-anode, pin2-cathode
25 J39 M.2-2250 B-key Reserved for 4G/LTE/5G module
26 J24 7+12 SATA connector For SATA expansion
27 J10 SFP+ eth0 10Gb WAN Fiber connector (see note 1)
28 J13 SFP eth2 1Gb WAN Fiber connector (see note 1)
29 M1 PoE module 802.3at/af 30W PoE module, power from J12
30 J12 Gb RJ45 with PoE- eth2 WAN with PoE input (see note 1)
31 J9 J9A, J9B, J9C, J9D 1Gb RJ45 for WANx1 and LANx3
32 J31 Dual ports USB3.0 type-A
female
33 J3 Micro-USB for debug console For debug console only
34 J23 +12V DC in DC Jack 5.5x2.1mm