Driver Installation
3
The installation of the i2100c is Plug and Play
Prerequisites
Local administrative privileges are required to install the driver.
To install the driver;
1. Place the CD into your computer’s CD drive. If a window appears, simply
close it.
2. Plug the i2100c into an open USB 2.0 port on your computer. If a window
appears mentioning Windows Update, select “No, not at this time.”
3. Select “Install the driver from a list or a specific location,” browse to your
CD drive and click “OK” or “Open”.
4. Next you will see a prompt advising you that Windows cannot verify the
publisher of the driver. Continue the installation by selecting “Continue
Anyway.”
5. Restart
if
prompted.
At this point the camera is installed and ready to use.
