MADIC ITALIA
Mod.N:Q060R06
9
/
26
4.5
LASER SAFETY CONSIDERATION
BV1000GTV contains a laser emitter and corresponding drive circuitry. The laser output is designed to
remain within Class 1 laser safety limits under all reasonably foreseeable conditions including single faults
in compliance with IEC 60825-1:2014 (third edition).
The laser output will remain within Class 1 limits as long as the MADIC ITALIA recommended device settings
(API settings) are used and the operating conditions specified are respected.
The laser output power must not be increased by any means and no optics should be used with the
intention of focusing the laser beam.
The laser doesn’t require any control, adjustment or maintenance.
Caution
: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
FIGURE 1 – LASER CLASS LABEL
Laser characteristics:
This device emits pulsed laser radiation with a period of 16.7 nanoseconds and 5 nanoseconds on time,
resulting in a duty cycle of 30%. The wavelength is 945 nm.
Compliance statement for Laser Notice 56:
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3., as described in
Laser Notice No. 56, dated May 8, 2019.
Manufacturing site:
The indication Mxxx on the product label indicates the manufacturing site:
M001 = MADIC ITALIA s.p.a. Via Volta 39 Cardano al campo 21010 Italy
Manufacturing date:
The manufacturing date is located on product label in the following format:
MNFG: mm-yyyy
m=month
y=year
