background image

                         

1

 / 

8

                                                     

GS819 Manual Rev. C               

 

 

 

CARBON MONOXIDE ALARM USER'S MANUAL 

MODEL No.: GS819 

 

 

 

                                                                                                                                         

                                                                                                                                                                                                                                                                         

 

 

 

 

 

 

 

 

Thank you for purchasing the 

GS819

 carbon monoxide (CO) alarm. This device is a product that has been built using state-of-the-art 

technology.   
This user guide contains important information on starting operation and using the devise. Store this user guide in a safe place for 
future reference. These instructions are a part of this product – bear this in mind if you pass on this product to others. 

Please take a few minutes to thoroughly read the user’s guide and familiarize yourself and your family with its operation.   
 
CAUTION: 

  This CO alarm is designed for indoor use only. DO not expose to rain or moisture. DO not knock or drop the detector. DO 

not open or tamper with the alarm as this could cause malfunction. 
        The alarm will not protect against the risk of carbon monoxide poisoning when the battery has drained. 

Installation of the alarm should not be used as a substitute for proper installation, use and maintenance of fuel burning 

appliances including appropriate ventilation and exhaust systems. 

Table of Contents 

1. Installation instructions--------------------------------2/8 

2. Product overview-----------------------------------------3/8 

3. Understanding your CO alarm---------------------------3/8 

4. What to do if the alarm sounds--------------------------4/8 

5. Battery installation/replacement-------------------------6/8 

6. General maintenance--------------------------------------6/8 

7. Carbon monoxide overview-------------------------------7/8 

KM 616830

 

EN50291-1:2010 + A1:2012

 

16

 

Summary of Contents for GS819









Reviews: