CORBY INSTALLATION GUIDE
CORBY INSTALLATION GUIDE
globalfurnituregroup.com
4
CBYR
xx
32 & CBYP
xx
LB32 - PENINSULA TABLE WITH LOW BASE (LB) PEDESTAL 32”D
Required tools
NOTE:
Open and assemble only one product at
a time to avoid a potential mix-up of parts and
hardware. It is advisable to assemble the unit on
a clean padded surface to avoid scratches.
CAUTION:
Do not drag the assembled furniture
across the floor. Lift the unit completely off the
floor, and move it to the desired location.
ASSEMBLY
Included hardware
Phillips PH screw
1/4-20 x 1
1/4
, Qty. 2
Washer plate
Ø 1/4”, Qty. 2
Double sided adhesive tape
Qty. 1
Riser box (
Sold separately)
Qty. 1
STEP 1: Clean the top surface of the pedestal with a damp cloth, followed by a
soft dry cloth in the direction of grain.
STEP 2: Place the peninsula table upside down on a clean padded
surface.
STEP 3: Attach the riser box to the peninsula table with Phillips PH screw
(1/4-20 x 1
1/4
) and washer plate (Ø 1/4”). Apply double sided adhesive tape to the
bottom of the riser box.
Safety glasses
Cordless screwdriver
Bit #6 Phillips
Screwdriver #6 Phillips
Fluid leveler
RISER BOX OPENING OUTSIDE
RISER BOX OPENING INSIDE
STEP 4: Flip the assembled peninsula table and the riser box and set them on the low base (LB) pedestal as the configuration requires. Apply moderate pressure
from the top of the peninsula table at least one minute for the pressure sensitive double sided tape to adhere.
FLUSH CONFIGURATION
STEP 5: The units are assembled. Adjust the glides to level the worksurface.
(Only Riser box opening outside shown for demonstration)
OFFSET CONFIGURATION
FLUSH CONFIGURATION
OFFSET CONFIGURATION
or
