Global BM 345, Mechanic'S Instructions

Page: 20 / 25

20
2.11 Transport brackets
2.11.1 Adjusting the transport brackets
CAUTION! Injury hazard!
Switch off the machine electrically!
The position of the transport brackets is given by the position of the angle lever
symmetrical to the presser. It should tip lightly and lie evenly against the needle
plate. The transport bracket pressure can be adjusted using separate screws for
each stand on the upper side of the material support arm.
2.11.2 Adjusting the airing for the transport bracket (figure 9)
The transport stands are pressed backwards when airing the material support
arm. The adjustable eccentric bolts serve as stops
(5) .
In the upper position of the material support arm, there must be approx. 2 mm
between the lever and bolts to ensure that the transport bracket presses
securely against the needle plate for every position of stitch depth control.