Global 761221 Instruction Manual Download Page 6

Page: 6 / 13

Instruction Manual

3. MOUNT PEDESTAL TO GROUND

•

Locate and install plumbing through ground as required. Refer to Rough-In Guide (page 4)

for proper location and correct plumbing.

•

This unit is designed to be installed on the surface of an existing or new concrete slab,

capable of supporting 450 lbs.

Position fountain base over plumbing and

secure to ground using provided anchor

kit (H3) mounting hardware (x4).

2. INSTALL BUBBLERS

2a.

Unscrew and remove

nut and washers from

Bubblers (P1).

2b.

Locate the hole on the drinking

fountain pan surfaces. Align and

sanwich with the two washers and

tighten the nut to secure the bubbler.

2c.

Bubblers are now

properly installed.

(H3) Anchor kit consists of:

- (4) M10 Nuts

- (4) M10 Lock Washers

- (4) M10 Standard Washers

- (4) M10 Anchors

Nut
Lock Washer
Standard Washer

Anchor

(qty 4)

Outdoor Bi-Level Drinking Fountain

w/ Bottle Filler & Pet Station

Summary of Contents for 761221














Search results

Summary of Contents for 761221

Reviews:

Related manuals for 761221

Brands by name

Popular brands

Global 761221, Instruction Manual

Search results

Summary of Contents for 761221

Reviews:

Related manuals for 761221

Brands by name

Popular brands