Instruction Manual
2
①
②
③
④
⑤
⑥
⑦
⑧
①
LCD Display
②
Function Button
③
“+” Button
④
“-” Button
⑤
Infrared Sensor
⑥
Measurement Trigger
⑦
Handle
⑧
Battery Cover
Operation Instructions
1. Insert batteries - Open the battery cover and insert (2) AAA batteries (not included)
into the bottom of the thermometer. Close the battery cover.
2. The thermometer will beep.
3. Tap the
FUNCTION
button to switch between “body” and “surface” temperature modes.
4. Press the
MEASUREMENT TRIGGER
to measure forehead temperature. In order to get
an accurate measurement, ensure the thermometer is 1 to 2 inches away from the forehead.
5. Press “
+
” or “
-
” buttons to review the last 20 measurement results.
6. Press and hold the
FUNCTION
button for 3 seconds to access the different function modes
below. Tap the
FUNCTION
button again to scroll through the following modes:
- F1: °F or °C unit mode - Press “
+
” or “
-
” button to select.
- F2: Max. temperature alarm mode; press “
+
” or “
-
” button to select.
- F3: Display data offsetting mode; press “
+
” or “
-
” button to select.
- F4: Buzzer sound activate/deactivate mode; press “
+
” or “
-
” button to select.
Note: Pressing the
MEASUREMENT TRIGGER
button will exit during any set up mode.
7. The thermometer will automatically shut-off when idle and will turn back on by pressing
any button.
Component Identification
Digital Infrared Forehead Thermometer
Product Maintenance
Note: Be sure not to damage and use extra precaution when cleaning the infrared sensor.
• Do not use abrasive cleaners to clean this product.
• Do not submerge the product into water or other liquids.
• Keep the product in a dry place to avoid dust, pollution and direct sunlight.
• Clean regularly using a dry soft cloth. If needed, use a damp cloth with water or a neutral
detergent to clean, then wipe dry with a clean cloth.
