1. Unbox Uprights, Clear Panel, Clamps, Grippers and Screws.
2. Mount each upright to each clamp using the Allen screws provided, with the screw holes on the uprights facing the flat side of the clamp bracket.
3. Mount each clamp to opposite sides of your table, approximately 1-1/4” from the edge as shown below. The nylon puck on the bottom of the clamp will tighten against the
steel tubing below the table top. Tighten the clamp knobs to secure the uprights.
4. Mount each Clear Panel with pre-drilled holes (Part H) to the uprights using the short countersunk screws (Part F) and finishing washers (Part G).
5. Slide the panel grippers (Part D) over the edge of the plain clear panel (Part J). Attach the grippers onto the adjacent panels (Part H).
6. Use the included Adhesive Backed Finned grippers (Part K) to attach the panels to the desktop. Be sure to have the spacing correct first, with the back panel over the desk,
and where the adhesive grippers will be completely on the desk, not hanging off.
Clear Plastic Protective Shield for Mobile Computer Cart 309235BK/BG
Assembly Steps
Model no. 309235S
2.
3.
4.
2x Screws
A.
No holes
this side
C.
E.
B.
F.
H.
J.
J.
J.
H.
H.
K.
H.
D.
D.
G.
Holes on
this side of
upright
3x Holes
side of
upright
aligns with
flat side of
bracket
Table top shown
transparent for clarity
Adhesive
bottom
Table top shown
transparent for clarity
Steel tube
Nylon puck
Steel tube
1-1/4”
5.
6.
