This machine must be grounded! Grounding provides
the path of least resistance for electrical current. To
reduce the risk of electrical shock should the machine
malfunction, the machine has a special grounding
plug.
This machine is intended for commercial use. It is
constructed for use in an indoor environment and is
not intended for any other use.
• Use with approved accessories only
• Use with non-approved accessories voids warranty
• DO NOT modify machine
• Modification to machine voids warranty
All operators shall read, understand and exercise the
following safety precautions:
1) Do not operate machine:
• Unless trained and authorized
•
Unless you have read and understood
operators manual
• In flammable or explosive areas.
• With damaged cord or plug.
• If not in proper operating condition.
• In outdoor areas.
• In standing water.
• With the use of extension cords.
2) Before operating machine:
• Make sure all safety devices are in place and
operate properly.
3) When using machine:
• Do not run machine over cord.
• Do not pull machine by cord or plug.
• Do not pull cord around sharp edges or corners.
• Turn power switch to “off” prior to unplugging
machine.
• Do not unplug by pulling on the cord.
• Do not stretch cord.
• Do not handle plug with wet hands.
• Keep cord away from heated surfaces.
• Do not pick up burning or smoking debris such
as cigarettes, matches or hot ashes.
• Report any damages to your supervisor.
• DO NOT attempt to fix machine by yourself. All
repairs must be made by authorized
technicians.
4) Before leaving or servicing machine:
• Turn off machine.
• Unplug cord from outlet.
5) When servicing machine:
• Unplug cord from outlet.
•
Use manufacturer supplied or approved
replacement parts.
• Any lifting or hoisting of machine should be
done with OSHA approved equipment and
safety precautions.
SAFETY PRECAUTIONS
3
Do not remove the ground pin under
any circumstances!
WARNING
!
