Assembly Instructions
Single Speed Exhaust Fan
3.
Use appropriate screws for framework
and wall conditions.
To mount louver assembly, use the eight
pre-punched 1/4" x 1/2" slotted mounting
holes of the louver assembly to attach
the unit to the framework.
4.
Seal the joint between the wall and the
louver with silicon or any other sealer.
5.
Insert the square plastic plugs into the
square holes on corner gussets located
on the back side of the shutter.
6.
Remove screws, washers and nuts from
the protective screen of the fan.
3
Exhaust Fan_Single Speed _248448_2944495-294497 8/15/14 8:18 AM Page 4
