Global Water
800-876-1172
•
globalw.com
- 5 -
V.
System Requirements:
Desktop or Laptop computer with:
1)
Windows 98, ME, 2000, XP Vista or Windows 7 Operating Systems
2)
CDROM Drive
3)
USB Port
Note that the software described here is for running on desktop and laptop
computers only. Software for many popular Handheld PDA devices is also
provided by Global Water. Special cables may be required.
VI.
Accessing the USB Port
Remove the thumbscrew from
the center of the cover and lift off,
the USB port is located inside.
VII.
Software Installation:
Global Logger Installation: This software is
for use on Windows based desktop and laptop
computers only. Insert the software installation CD and run the Setup program.
This will install the Global Logger application in the Program Files folder and
automatically put the Global Logger II icon on the desktop.
USB Driver Installation: With the installation CD in the CDROM drive and DC
power applied to the logger, plug the USB cable into the data logger to open the
ADD New Hardware Wizard. The menus that follow will look different for different
operation systems but the procedure is the same. Do not allow the Hardware
Wizard to automatically search for the driver. Instead, specify the location
(CDROM). If a generic driver gets, or has been previously installed, it must be
uninstalled before proceeding by using the Add or Remove Programs section of the
Control Panel. Instead, click the Search External Media box or Specify a Location
box and install the driver from the CDROM. Running the Setup program that installs
the Global Logger software also installs a folder with the driver in it. This location
can also be specified if the CDROM is not available; although, it is recommended
that the driver be installed at the same time the Global Logger is installed.
