6 |
P a g e
Operation
When installation is complete, the
unit will fill up with water and
shut off when the tanks are full.
Plug the unit in to an outlet and
press the cold/hot faucets until a
steady stream of water comes out.
Figure 2.
Faucet operation
*Make sure the tanks are filled
with water before continuing to
the next step.
Turn on the hot/cold switches
located on the back of the cooler.
Both hot/cold elements will begin
chilling and heating the water
inside the unit. Indicator lights will
also illuminate of the front of the
cooler.
Figure 2.
Hot and cold power on/off switch
