38
PCMCIA card and then on PCMCIA Card service, you can see the status of PCMCIA
card. If there are yellow sign either on adapter or PCMCIA card, please check followings.
2-1) Check if your Notebook supports 3.3V card.
2-2)Check if your Notebook has a free IRQ
2-3) Check that you have inserted the right card and have installed the proper driver.
If the GL-241102 does not function after attempting the above steps, remove the PCMCIA adapter,
and do the following:
From the run window enter, c:\windows\system, locate and delete the cw10.sys file
Open the “Control Panel” double-click “System” and delete PRISM2 IEEE 802.11b PC-
card Adapter.
Restart the PC and repeat the hardware and software installation steps outlined in
Chapters 3 and 4.
The GL-241102 station cannot communicate with other computers linked via Ethernet in the
Infrastructure configuration.
Probable Solution:
Ensure that the GL-241102 with which the station is associated is powered on.
Confirm the station is configured with the same operating radio channel as the GL-241102.
If the IDs are different, change the GL-241102 and all the stations within the BSS to
another radio channel.
Ensure that the station is configured with the same security options as the GL-241102, and
can be turned off and on with the same security key.
Confirm that the BSS ID is the same as the GL-241102 for a roaming disabled station.
Alternately confirm that the ESS ID is the same as the GL-241102 for a roaming enabled
station.
