15
7.
Select “SSID”; enter a “Value” of “PRISM2”.
NOTE
: The SSID can have any value, but should have the same value as the Access Point
(AP). In Ad-Hoc mode, all clients should share the same SSID.
8.
Select “Transmit Rate”, and choose a “Value”.
NOTE
: Fixed 11 Mb/s is the preferred “Value” for environments where the client has line of
sight access and is a short distance away from the AP. Fully Auto is the recommended setting
for clients that are farther away from the AP and where there may be interference between the
client and the AP.
9.
Select “Use Wep”, and choose a “Value”.
