- 7 -
5.3 Turning the headset ON and OFF
Turning the headset ON
1. Press and hold the TALK button for at least 3 seconds until 2 beeps
are heard
2. At the same time, Green LED flashes 5 times rapidly for a few times
3. The headset is now turned on. Green LED will flash once every 3
seconds.
Turning the headset OFF
1. Press and hold the TALK button for at least 3 seconds until 2 beeps
are heard
2. At the same time, Red LED flashes 5 times rapidly for a few times
3. The headset is now turned off.
6. INSTRUCTIONS
6.1 Pairing the headset
Before you can use the headset, you must pair it with an audio gateway device
you want to use. To pair the headset with the device, you need to:
1. Turn the headset OFF
2. Press and hold the TALK button. 2 beeps would be heard after 3 seconds.
After 4 more seconds, the two LEDs would cross-flash RED/GREEN.
Release the TALK button.
3. The headset is now in pairing mode and is ready to be paired with a
Bluetooth-enabled device.
4. Pair the headset with the device according to the instructions provided by
the device’s user guide. The default headset passkey is 0000.
5. When pairing success, Green LED flashes every 3 seconds. If the LEDs
still cross-flashes RED/GREEN, it means the pairing was failed. You need
to go back to Step 1 and pair again.
Summary of Contents for GL2BHS83
Page 5: ...4 2 4 Figures...
