Push [
SHIFT
][
Auto
][
LOAD
].
The load will now show location 1 with and the testing voltage (up to
the limit of 5 V) and after 10 seconds it will change to location 2 with
a limit of 60 V.
Auto execute will run continuously through your 9 programs starting
at location 1. Each location must be set to the same mode such as
CC or CV otherwise the program will stop at the first location with a
different mode.
5.6 Control from a PC
1.
The LD-200P Software is compatible with the following
operating systems: Windows 9X, Windows ME, and
Windows XP, Windows 7 (32-bit only).
2.
Download the software from the LD-200P page on our
website: globalspecialties.com. See the “DOWNLOADS”
tab.
3.
Browse to the copy of the software on your computer.
4.
Double click on the “Setup.exe” file. Follow the
instructions on the screen to install the LD-200P
Software.
5.
Browse to the Driver folder. Use
CP210x_VCP_Win2K_XP_S2K3
for Windows ME, 2000
or XP. Use
CP210x_VCP_Win7
for Windows 7. Double
click on the
appropriate driver.
Follow the instructions
on the screen to install
the driver.
6.
Connect the LD-200P to your
