Global Payments LSK1500 User Manual Download Page 54

Page: 54 / 57

LSK 1500/1550 User Manual, March 2021

CONFIDENTIAL

Coin Hopper Problem

Diagnostics

Failure to dispense coin

1.  Check the coin hopper for jam.
2.  Check to see if the hopper is empty.
3.  Check coin drop path for blockage.

Main Power Supply

Main Power Supply Problem

Diagnostics

No light on ON/OFF switch

1. Check AC input cable to power supply for loose

connection.

2. Check AC input cable connection to the wall

outlet or UPS.

No AC power to PC unit

1. Check AC OUT cord on top of power supply for

loose connection.

2. Check AC IN cord to back of PC for loose

connection.

3. Check power switch on both power supply and

PC unit.

No DC power to devices

Please call our 24/7 CAMS support desk (800-500-
1973).

Indicator Lights

Indicator Lights Problem

Diagnostics

No light

1. Check cable connection from SIC board to flicker

board.

2. Check to ensure the light signal on flicker board

is working.

Summary of Contents for LSK1500


























































Search results

Summary of Contents for LSK1500

Reviews:

Related manuals for LSK1500

Brands by name

Popular brands

Global Payments LSK1500, User Manual

Search results

Summary of Contents for LSK1500

Reviews:

Related manuals for LSK1500

Brands by name

Popular brands