www.globallightllc.com
Fax: +971 4 341 10 90
Tel: +971 4 340 44 58
1.
Complete the connection correctly as shown in the previous diagram.
2.
In order to synchronize the remote to the receiver, press and hold the ON/OFF button on the receiver for 3
seconds until you hear a beeping noise and see a green light on receiver. Then release the key and press
any button on the remote. Now the remote should be synchronized with the receiver.
3.
In order to disconnect the remote from the receiver, press and hold the ON/OFF button on the receiver until
you hear a beeping noise, see a green light and a second green flashing light on receiver. (Without
releasing the ON/OFF button on the receiver) Press any button on the remote to desynchronize the remote
from the receiver.
Pairing of PWM Controller and Wireless Remote Control
