STEP 1
: Locate the retro-fit anchoring sleeve (as shown above) picture A
•
Once you determine where your lift is going to be located at your pool,
place the anchor sleeve down So you can mark a circle around the base on the concrete
where you will need to drill the hole. NOTE: From the pools edge or if an obstacle is present
Before the water, the minimum distance is 12” and the maximum is 24” from
the front of the anchor sleeve. See picture B
Picture A
Picture B
Front Edge of
Anchor Sleeve
***NOTE: The installation of Global Lift Corp’s anchor system’s are a guideline of
minimum requirements. In some states or municipalities they may require
additional steps due to their local codes or ordinances.***
FEB 2012
RETRO-FIT Anchor R-450A
CAUTION: Minimum anchor distance from a vertical obstacle is 13”, if
closer The lift will hit while in operation
R-450A
