Front of Anchor Sleeve must be 12” to 24” from the water’s edge or 13” min if an obstacle is present before the
water.
Attach copper wire to the bonding screw and then to your bonding grid
Cold Pin’s should be ½” rebar 6” to 8” long
NOTE: Make sure your anchor sleeve is level and square with your pool’s edge
.
COMPACT SAND
6”
3’
Concrete
Concrete
Cold Pin
Cold Pin
Water
Pool Wall
3’
3’
Anchor Sleeve
Overview
Section Detail
12”to 24”
ROTATIONAL SERIES R450A – SLEEVE ANCHORING SYSTEM
Bonding Lug
Anchor Sleeve
Actual application
FEB 2012
New Construction/ Saw Cut Sleeve
Anchor R-450A
CAUTION: Minimum anchor distance from a vertical obstacle is 13”, if
closer, The lift will hit while in operation
