7
•
If you live in an area where there are power surges, exercise the following
precautions:
o
Do not connect your refrigerator to the AC outlet.
o
Install an automatic voltage regulator with a minimum force of 1000 Watts.
o
Make sure that the regulator can withstand the power surges that occur in
your area.
o
Ask a qualified electrician to inspect the wall outlet and the electrical
circuit, to ensure that the circuit is properly grounded.
To ground the circuit, follow the grounding regulations and call a qualified electrician.
If the AC power cord is damaged, it must be replaced by an electrician from an
Authorized Service Center, to avoid any risk of an accident.
HEATING OF AREAS NEAR TO THE FREEZER
Your freezer comes equipped with a device that prevents condensation. The heating
of some external zones of your refrigerator is normal. This prevents condensation on the
exterior of your refrigerator. However, in conditions where there is high atmospheric
temperature and humidity, a light film of condensation could form. Dry this with a soft
cloth.
INITIAL CONNECTION
•
Once your refrigerator is in place, wait 4 to 6 hours before connecting it so that the
gas and the compressor oil settle.
•
Before connecting the refrigerator, turn the refrigerator temperature control or adjust
the temperature level of the display to mid-position (between 4 and 6).
•
Connect the plug to the wall AC outlet.
•
Allow it to operate empty and with the doors closed for 4 hours before loading with food.
•
Avoid opening the door so that it can reach the desired temperature.
•
If you want to place your refrigerator in another location, disconnect it before
moving.
•
Once it is in its new location, repeat these steps.
Summary of Contents for SUMMIT GIDIFF946W
Page 15: ...15 NOTES...
