2
Electronic Lock
User Manual
Installation
1. Open the locker door that
the Electronic Lock will
be installed on. Remove
the nuts holding the plate
that covers the hole in the
door.
2. Using the included
template, align the large
hole on the locker and the
hole indicated in the template.
Align the edge of the template so
that it is parallel with the edge of
the locker door. Drill a second
hole for the securing screw
included in the Electronic Lock.
Clean off any metal dust.
Drilled Hole
3. Remove the locking bar
from the lock and the
securing nut from the
threaded core. Place
batteries inside the unit.
Vent Plate
Rubber Backing
Securing Screw
Securing Nut
Locking Screw
Lock Bar
4. Insert the rubber cover over the
batteries, putting the threaded core
through the rubber. Depending on the
size of the door on the locker, the
Vent Plate may be necessary.
If Plate is necessary, slide the Plate
over the rubber mount so that the
gap is on the left Side
5. Insert the threaded core
through the door of the locker.
Reattach the Securing Nut, Lock Bar,
and Locking Screw onto the threaded
core. Insert the Securing Screw
through the drilled hole and secure
the unit through the hole on the top.
No Plate:
Single Tier
Double Tier
Plate Required:
Triple Tier
4 Tier
6 Tier
The lock should rest flatly against the
locker door with the plate
