1 / 1
6.2.
0
REPLACEMENT
OF FRONT WHEEL BEARINGS
General informations
Related topics
Tools
Lifting and lower accessibility
Replacement of tyres and wheels
• Dismantle the front wheel.
The front wheel bearings (1) are force splined into the
front wheel hub.
To be able to remove a bearing a 10 - 12 mm round
bar (2) is needed. Insert this from the opposite side
and hammer it on various points around the internal
circumference of the bearing.
The new bearing must be inserted with the help of a
plastic mallet or a bronze pad (3)
working only on the
outer ring of the bearing.
MODEL YEAR 2015
MJ66-Hy
MJ66
WORKSHOP MANUAL
BACK
