Global garden products MJ66, Workshop Manual

Page: 42 / 88

MAP
1 / 3
General informations
The rear axle (Transaxle) is made up of single main ­
tenance free sealed unit which includes the trans­
mission unit and the differential.
It only needs to be removed to be replaced or for an
overhaul by the Manufacturer’s Service Centre.
Related topics
[ 4.2] Brake adjustment
[ 5.8] Removal of the discharge conveyor
[ 5.9] Removing the lower part of the rear plate
[ 6.1] Replacement of tyres and wheels
Tightening torques
23 Nuts for bracket fastening ............. 25 ÷ 30 Nm
24 Self-tapping screw ........................ 25 ÷ 30 Nm
25 Rear axle fastening nuts ................ 20 ÷ 25 Nm
5.6.
2
REMOVAL OF THE REAR AXLE
mechanical drive models
Mechanical drive models
• Remove the collector channel.
• Remove the lower part of the rear plate.
Place two blocks (1) about 160 mm high under the two
supports (2) of the rear plate’s lower part.
• Dismantle the rear wheels.
Loosen the two nuts (5) enough to move the belt guide
(6) away from the pulley (7) and free the belt (8).
Unhook the cotter pin (9) and remove the pin (10) con-
necting the brake cable (11).
Disconnect the spring (12).
MODEL YEAR 2015
MJ66-Hy MJ66
WORKSHOP MANUAL
BACK