4.3 BRAKE ADJUSTMENT
Reduced braking power is corrected by adjusting
the spring on the brake rod which can be reached
af ter having lifted the wheels cover.
Lift the wheels cover [see 2.5].
The adjustment is to be made with the parking bra ke
engaged and consists of altering the length of the
spring to the best measurement. The braking ca -
pacity is increased by screwing the nut down on the
rod (and thus shortening the length of the spring).
➤
➤
for Tuff Torq K46T drive models:
Turn the nut (10) so that the spring (11) is 45 - 47
mm long, measured from the inside of the wa -
shers. Never go under these amounts to avoid
overloading the brake unit.
NOTE
No further adjustments to the braking system are
re quired.
➤
➤
for Hydro Gear T2-BDBE-2X1A-16X1 drive
models:
Loosen the nut (21) and then turn the nut (22) so
that the length of the spring (23) is 34-36 mm mea-
sured from the inside of the washers.
Never go under these amounts to avoid overload-
ing the brake unit.
NOTE
No other adjustments to the brake system are re-
quired
When the adjustments have been made, the parking
brake should prevent the machine from moving on a
slo pe of 30% (16°) with the driver in position.
Close up the wheels cover [see 2.5].
3/2015
72FL hydro
4.3
.
1
BRAKE ADJUSTMENT
1 / 1
쑮
쑮
쑱
쑱
WORKSHOP MANUAL
pag.
MODEL YEAR 2016
© by GLOBAL GARDEN PRODUCTS
21
22
23
34 - 36 mm
11
10
45 - 47 mm
<= ...BACK... <=
