Global Fire Equipment //
globalfire.pt
ma_orionminirepv2_01_020000_en_201015
PANEL STATUS INDICATORS & CONTROLS
STATUS
FIRE
– LED used to indicate any FIRE ALARM condition present on panel.
FAULT
– LED used to indicate Fault condition present on panel. In case of communication fault between ORION and
ORION MINI REP V2 or any other peripheral, Fault LED will flash at a rate of once per second.
DISABLED
– Disabled Status LED used to indicate that the panel has functions that have been disabled in either Access
Level 2 or 3 modes. Check ORION for detailed information.
TEST
– This LED is active whenever panel is in TEST MODE. Only activated when in Engineering Mode and TEST mode
has been selected at the ORION panel.
SUPPLY
- This LED signals the presence of Supply. Additionally, when in Access Level 1 this LED is permanently on. If in
Access Level 2 (USER CODE 2244) this LED will flash at a rate of once per second.
SYSTEM FAULT
– This LED will be lit whenever there is a processor failure or corruption of the panel firmware.
5
