•Page
globalcontract.com
3
• March 2019
GLOBAL
Contract
M
M
M
M
M
M
USER GUIDE
Preform Reset / Homing
Memory Position
Accessign memory Positions1-3
Setting memory Position 1-3
Use Preset Heights
Critical Step. At installation or if a critical component such as a column or mo-
tor is changed or disconnected, a Reset must be performed.
Note: Ensure that the area around and under the table are clear.
Set/Adjust a quick memory position. THere is a quick memory position option
to set the Up and Down buttons to move the desk to a predefined height. To set
the predefined height for a button:
Set/Adjust a quick memory position. THere is a quick memory position option
to set the Up and Down buttons to move the desk to a predefined height. To set
the predefined height for a button:
and
or
or
or
or
or
Press and hold the Up and Down buttons
at the same time.
Adjust the table to the preferred height to
be stored as a memory position.
Move the table to desired height.
Press and hold either the Up or Down
button to move the desk to the quick
memory position, the desk will stop at
the preset height. Release the button.
immediately press the Up or Down but-
ton to store the current height as a quick
memory position to the selected button.
Press the M button to save current
height.
Press and hold the same button as previ-
ously to bypass the desks preset height.
Press the M button, and release.
Hold the M button for at least 3 seconds
Press and hold the M button while the
table moves to the stored memory
position.
Use the Up or Down button to choose
stored position 1, 2, or 3
Press the M button, for at least 3
seconds.
Press the M button to select
Use the Up or Down button to select
position to store the height to 1, 2 or 3
1,2 or 3
1,2 or 3
Use the Down button to navigate to SET.
Hold the buttons pressed at least 8
seconds.
Release the Up and Down buttons.
Release the Down button.
The reset process is completed
The three dashes on the display will be
replaced by a height reading.
Immediately press and hold the Down
button - the display will indicate reset
mode with three dashes and a house
in the lower left corner - until the desk
reaches its lowest position and stops
moving.
8 seconds
Release
Release
Complete
Height
Adjustment
