background image

Flex Link Serial Cable  

Quick Start

Global Caché

 

is lessening our carbon 

footprint by reducing our paper  

output.  For complete documentation 

and tutorials, visit: 

www.globalcache.com/docs

Getting Started.

 

Once the iTach Flex is 

connected to the network by either an Eth-

ernet cable or WiFi, plug the Flex Link Se-

rial cable into the Flex Link Port. 

To configure Serial cable fuctionality, right 

click on the unit entry in 

iHelp*

 and click 

configure. A web browser will present the 

web configuration pages of the Flex. To 

access the set up pages manually, type in 

the unit’s IP address. Flex units in de-

fault will reside at the default address of 

http://192.168.1.70

. On the “Flex Link 

Port Configuration” page, select “Flex Link 

Serial Cable” to configure the settings as de-

sired. 

Flex Link Serial cables can be set to either 

standard (straight through) or crossover 

(null modem) modes by changing the

Quickstart_FLCserial_1up_062713.indd   1

7/1/2013   12:56:09 PM

Reviews: