6
Important safety instructions
1.
Read carefully and follow all safety instructions and the warranty card before
installing the ADSL router Glitel GT-5802W.
2.
During a storm, in case you do not have an overvoltage protection for 230V
power supply and phone line, we recommend that you unplug the AC adapter
from the power supply and disconnect LAN cables from the router.
(Note: overvoltage protection for 230V power supply and telephone line can be
purchased in commonly available computer shops or electronic shops).
3.
Use approved power adapter only.
4.
Do not place the router where people may walk on the cables.
5.
Do not use the router near water, heat sources or dust sources. Do not expose the
router to direct sunlight. Do not expose the router to vibration. Under no
circumstances should the router come into contact with water or other liquids.
6.
Do not place the router in close proximity to other devices, such as radio,
television, microwave equipments or office equipments.
7.
Place the router onto a non-slip mat to prevent stains on furniture as well as to
prevent the router from falling and subsequent damage.
8.
Do not insert any objects into the openings of the router.
9.
The router can be operated at an ambient temperature of 0°C to +50°C.
10.
Always turn off the router before cleaning. Never use water, thinner, benzene,
alcohol or other strong detergents to clean the router, as this may damage the
housing. Use only a slightly damp cloth or antistatic cloth. Never use a dry cloth.
11.
In the event of damage, unplug the router from the mains power supply and
disconnect DSL and LAN cables from the router and refer the router to qualified
service personnel.
The following situations constitute damage:
a) if the power adapter is damaged,
b) if liquid is spilled on the router,
c) if the router is exposed to rain or water,
d) if the router is dropped or if the router housing is damaged,
e) if the router does not operate even when the instructions are followed.
